MediaWiki API result

{
    "batchcomplete": "",
    "continue": {
        "gapcontinue": "Religion",
        "continue": "gapcontinue||"
    },
    "warnings": {
        "main": {
            "*": "Subscribe to the mediawiki-api-announce mailing list at <https://lists.wikimedia.org/mailman/listinfo/mediawiki-api-announce> for notice of API deprecations and breaking changes."
        },
        "revisions": {
            "*": "Because \"rvslots\" was not specified, a legacy format has been used for the output. This format is deprecated, and in the future the new format will always be used."
        }
    },
    "query": {
        "pages": {
            "5429": {
                "pageid": 5429,
                "ns": 0,
                "title": "Refutation of metal analysis deconstructions by IIG",
                "revisions": [
                    {
                        "contentformat": "text/x-wiki",
                        "contentmodel": "wikitext",
                        "*": "[[Category:Articles_by_others]]\n= <span style=\"color:#000000;\">Few words</span> =\n\nDr Vogel's analysis of metal samples given by Meier have been attempted to be de-constructed thrice by IIG. \n\nThe first attempted de-construction was published in IIG website and also reproduced in billymeierufocase.com<ref>http://www.billymeierufocase.com/metaldeconstruction.html</ref>*. It is not known who authored the deconstruction, but it could very well be Ivan (who authored the second and third attempts). Ivan has a Phd in Electrical Engineering from University of California (UCLA). He is associated with HRL Laboratories, LLC (a contractor for DARPA). He is also an active member of IIG.\n\nA second attempt at deconstruction was made on December 2011 by Ivan Alvarado-Rodriguez and also published in IIG website and reproduced in billymeierufocase.com<ref>http://www.billymeierufocase.com/metaldeconstructionupdate.html</ref>*. This was essentially an update of the first.\n\nA lesser known, updated version of the second attempt, was published in Openminds.tv <ref>http://www.openminds.tv/deconstruction-billy-meiers-metal-samples/28955</ref> in January 2012. This was again authored by Ivan Alvarado. \n\n\nHenceforth these will be referred as \u201cfirst attempt\u201d, \u201csecond attempt\u201d and \u201cthird attempt\u201d.\n\n\nThe author strongly encourage the readers to read [[#Appendix A \u2013 Important terms and procedures]] before reading rest of the article, and to reference the original article during reading.\n\n= <span style=\"color:#000000;\">Part 1 \u2013 First Attempt</span> =\n\n\n\nIIG mentions:<span style=\"color:#004586;\">'''\u201c'''</span><span style=\"color:#004586;\">1. The 1983 book </span><span style=\"color:#004586;\">UFO\u2026Contact From The Pleiades Volume II</span><span style=\"color:#004586;\"> [1], the 1987 book </span><span style=\"color:#004586;\">Light Years: An Investigation Into The Extraterrestrial Experiences Of Eduard Meier</span><span style=\"color:#004586;\"> [2], and the 2001 book </span><span style=\"color:#004586;\">And Yet\u2026They Fly!</span><span style=\"color:#004586;\"> [3] all state that research chemist Marcel Vogel used a scanning electron microscope to analyse the metal sample.</span>\n\n<div style=\"color:#004586;\">2. All three books also state that Marcel Vogel detected the rare-Earth element Thulium using the scanning electron microscope.\u201d</div>\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">We know that it is scientifically impossible to determine the composition of an object simply using a </span><span style=\"color:#004586;\">microscope regardless of the magnification.\u201d</span>\n\nIIG based this conclusion from Guido's And Still They Fly where Guido joined two different analysis in same paragraph (pp 181) to convey that a small area under electron microscope enlarged 500 dia showed evidence of micro-machination and the same area contained rare-earth element Thulium. IIG thus assumed electron microscope photographs were used to detect micro-machination were used to detect Thulium. Detection of Thulium using electron microscope photographs was not found either in Light Years, Preliminary report or Supplementary report. It was mentioned, electron microscope was used. But it is of paramount importance that either electron microscope, scanning electron microscope or scanning transmission electron microscope can be and usually the source of electron for an Energy Dispersive X-Ray Spectroscopy (EDS or EDX) <ref>[http://en.wikipedia.org/wiki/Energy-dispersive_X-ray_spectroscopy#Equipment http://en.wikipedia.org/wiki/Energy-dispersive_X-ray_spectroscopy#Equipment]</ref>. This type of x-ray production in the sample is the same principle as that of the generation of x-rays used in x-ray diffraction instruments. Detectors in EDS collect the characteristic x-rays that are generated from the sample to allow for compositional analysis of the material<ref>http://www2.arnes.si/~sgszmera1/html/material_analysis.html</ref>. In fact, IIG failed to consider the videos of metal analysis where Marcel Vogel produced spectroscopic results to analyse the elemental composition and where he detected Thulium and other elements. \n\nWhat Vogel actually did is there in tape for everyone to see. He pointed into the plain section of one sample and mentioned that he found evidence of what looks like mechanical manipulation. He mentioned that ''\u201cWe did and analysis of this area here, now at 500 diameter (showing the electron microscope image), the elements that we found (turns over to the spectroscopic analysis) were totally surprising. The major element which is shown here was the rare-earth metal Thulium (spells). It was totally unexpected with a very small trace down here Bromine. This minute dump down here was a combination of Argon and Silver. Now the remarkable thing we noticed was that yes we got this band here (points to where he detected Thulium), this was the only one that matched in the spectral analysis in the computer, but the secondary bands that are connected with it were not present, meant that it was a very pure metal, but the secondary emissions were not present.\u201d''\n\n\n<span style=\"background-color:transparent;\">Vogel used two different techniques to find evidence of micro-machination (video or image from electron microscope), and elemental composition using energy dispersive spectroscopy with a scanning electron microscope (used as source). IIG implies that Electron microscope (photograph) was used in elemental analysis, which is an argument for distraction.</span>\n\n\nIIG mentions:<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">3. The 1987 and 2001 books both state that \u201cone microscopic area revealed </span><span style=\"color:#004586;\">''\u2018an enormous m\u00e9lange of almost all of the elements in the periodic table. Each pure element was bonded to each of the others, yet somehow retained its own identity.''</span><span style=\"color:#004586;\">\u201d </span>\n\n\nThe author could locate this comment in the second edition of the 2001 book \u201cAnd Yet They Fly\u201d, i.e. Guido's \u201cAnd Still They Fly\u201d. \n\n<span style=\"background-color:transparent;\">Vogel had analysed other areas of the same sample before and in the crystalline part, found Silicon, Iron, </span><span style=\"background-color:transparent;\">and Sulpher. The comment Vogel actually gave - </span><span style=\"background-color:transparent;\">''\u201cIn this crystalline area, the predominant element was Silicon, and iron, and there was a secondary band of Sulpher, which is right here. These are very very intense bands and </span><span style=\"background-color:transparent;\">'''we did not attempted to analyse the other particular lines'''</span><span style=\"background-color:transparent;\"> (gestures in between Silicon and Iron, and Iron and beyond) of the <muffled>, we just took the 3 main ones and list out there.\u201d ''</span>\n\n<span style=\"background-color:transparent;\">Note that in the video Vogel never said that \u201call\u201d the other lines are elements \u2013 just that he did not analyse them (for reasons unknown). One probable reason is that what looks like Bremsstrahlung radiation in a poor quality video, had some features that prompted Vogel to suspect other elements (not legible from the not-so-sharp video). Certainly </span><span style=\"background-color:transparent;\">auto-peak-detection (refer [[#Appendix A \u2013 Important terms and procedures]]) by the computer did not work, probably because of the unusually smooth fall off which was either due to low peak to background ratio, or due to the close spacing of peaks. The instrument could have interpreted any adjoining peaks as background and therefore had ignored probable elements. That Vogel suspected other elements in the region what appears now to be Bremsstrahlung continuum is a fact, but he did not further analyse this as evident from the video. Also this region, even if contained hidden peaks, Vogel would have found I extremely tough to meaningfully identify elements from this section. Hidden peaks or not</span><span style=\"background-color:transparent;\">, it is not possible to deduce from the data at hand, that in any way </span><span style=\"background-color:transparent;\">''\u2018an enormous m\u00e9lange of almost all of the elements in the periodic table\u201d can be''</span><span style=\"background-color:transparent;\"> inferred from the concerned section of the video of the spectral analysis. Why Guido's comment was linked to this part of spectral analysis by IIG, is unknown, as there is doubt that Guido's inference is based on analysis of another area of the sample, not on video. Vogel might not have recorded the concerned section at all as we will investigate now.</span>\n\n<span style=\"background-color:transparent;\">The author is of the opinion that this comment by Guido echoes the point made by Wendelle and the investigators in the Preliminary Report pp 426 as reproduced below. This paragraph reproduced below is the best match which could have been taken by Guido as source. Note that this paragraph is a part of a summary that lists the findings of the investigators, i.e findings from both metallic and non-metallic (crystalline) part, and this summary is again based on information provided in the preceding pages of the report.</span>\n\n\n[[File:IIG_Metal_Deconstruction_-_preliminary_rep_-_unusual_number.jpg|300px|thumbnail|center|Unusual number of trace elements]]\n\n\n\n<span style=\"background-color:transparent;\">However, on closer inspection, this statement is not related to the crystalline part of the sample, whose spectrograph shows what looks to be Silicon, Iron, Sulfur and what appears to be Bremsstrahlung continuum (in which Vogel might have suspected other elements), </span><span style=\"background-color:transparent;\">'''but some area of the metal part'''</span><span style=\"background-color:transparent;\"> and here's why:</span>\n\nAfter describing that Thulium was found and that secondary bands for elements were missing (Preliminary report pp424) the Preliminary report states that non-electric cold fusion was suspected because of no ash or heat residue, and that pure Aluminium and Silver were also found (now into Preliminary report pp425), then the next paragraph mentions:\n\n[[File:IIG_Metal_Deconstruction_-_preliminary_rep_-_metallic_part.jpg|300px|thumbnail|center|Describing the metallic part]]\n\nImmediately after the above paragraph (Figure \"Describing the metallic part\"), the report proceeds to explicitly mention that a non-metallic (i.e. crystalline) part of the sample is now being referred. The text of the report starting from \"Examination of a non-metallic part of the specimen..\" until the summary, has no mention of findings of any atomic build up or large number of elements, and that makes it clear that the source of the point 3 in the summary is from the the paragraph reproduced in the Figure \"Describing the metallic part\". \n\nThe author noted that the spectrograph which yielded Rhenium is '''not''' shown in video. Any x-ray diffraction analysis that might have been done by Vogel were also not made part of the interview video. It is highly likely that Vogel did not record 100% of his analysis in video, and that there were additional tests that Vogel carried out outside camera, and that could have given him additional insights.\n\n\nIIG Mentions:<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">Even using magnification far greater than what Marcel Vogel used in his analysis it is still impossible to view the elemental, chemical, or atomic structure of an object using a scanning electron microscope.</span><span style=\"color:#004586;\">\u201d</span>\n\n\n<span style=\"background-color:transparent;\">Guido, in his book combined </span><span style=\"background-color:transparent;\">two different analysis in same paragraph (And Still They Fly pp 181) to convey that a small area under electron microscope enlarged 500 diameter showed evidence of micro-machination and the same area contained rare-earth element Thulium.</span><span style=\"background-color:transparent;\"> </span><span style=\"background-color:transparent;\">That Vogel used two different techniques, evidence of micro-machination was determined studying image from electron microscope, while elemental composition determination was determined using spectral analysis (with a scanning electron microscope as source), is for everybody to see on video. </span>\n\n<span style=\"background-color:transparent;\">IIG naively implies that Electron microscope (photograph) was used in elemental analysis, which is wrong. The fact is \u2013 Vogel did a micro-structure analysis (using SEM), then did a spectral analysis using energy dispersive spectroscopy to find the elements is there for everyone to see. Furthermore, the investigators intended to do perform x-ray diffraction analysis and Vogel was the right person, for this technique is ing widely used for x-ray crystallography. Though not on the interview video, it is likely that x-ray diffraction technique was also used to further analyse the structure and bonding. </span>\n\n''From preliminary report - \u201cWe could see at this point that there are at least three more things we must do with these specimens. We should have an x-ray diffraction analysis and scanning electron microscope photographs to determine the structure of the alloy \u2013 how it is put together. We should also perform an energy dispersive x-ray examination and try to get a good quantitative analysis.\u201d ''\n\n\nIIG mentions:<span style=\"color:#004586;\">\u201cAs mentioned earlier, he was not a metallurgist.  He was a chemist. As such, he was not qualified to perform a metallurgical analysis of Billy Meier\u2019s metal sample. A chemist is defined as \u201ca person versed in chemistry or given to chemical investigation.\u201d A metallurgist is defined as a person versed in \u201cthe study of metals and their properties in bulk and at the atomic level.\u201d </span>\n\nIIG fails to mention a chemist is an expert on the study of composition of matter and its properties and expert in doing so \u2013 precisely what he did with the metal samples. By virtue of his profession, he would have had extensive experience in SEM EDS technique. <span style=\"background-color:transparent;\">He had also become an expert in optical microscopy courtesy his work with crystals.</span> In his own words - ''\u201cFor the past 20 years, since 1960, I have developed a skill in optical microscopy because I waned to study liquid crystal systems\u201d''. Plus, Vogel had 32 patents and an illustrious career in the line of luminescence, phosphor, magnetics and liquid crystals. To be an expert in the before mentioned areas, Vogel had to be an expert in most of the areas he applied during the sample testing.\n\nBy IIG's own logic, IIG's Ivan, who is a PhD in Electrical Engineering, would be discredited by just looking at the credential, being an Electrical Engineer and not a metallurgist.\n\n\nIIG mentions:<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">It turns out that an actual metallurgist did analyse the metal sample and this is what was revealed:</span><span style=\"color:#004586;\">Page 214 of the 2001 book </span><span style=\"color:#004586;\">And Yet\u2026They Fly!</span><span style=\"color:#004586;\"> states the following:</span>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\"><span style=\"color:#004586;\">''A metallurgist from the University of Arizona examined one of the metal fragments and analysed it as a simple \u2018cooking pot metal\u2019 or cheap cast metal alloy used to produce such things as tin soldiers.\u201d''</span>\n\nThis comment has to be looked into with perspective. There are several possible origin of this comment as we will see.</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">From Gary Kinder's Light Years:''\u201cAnd Elders reminded Stevens that a metallurgist at the University of Arizona had already examined one of Meier\u2019s metal specimens and labeled it \u201cpotmetal,\u201d a low-grade casting alloy used to make such things as tin soldiers.\u201d''</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">But also next sentence:</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">''\u201cThese were the initial steps in the analysis,\u201d recalled Welch. \u201cCompared to what ultimately occurred, they were very, very, very basic.\u201d''</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">From And Still They Fly (2<sup>nd</sup> edition of And Yet They Fly):\u201c''A metallurgist from a Swiss Company in Dubendorf, examined one of the metal fragments and analysed it as a simple \u201ccooking pot\u201d metal or a cheap cast metal alloy used to produce such things as tin soldiers.\u201d''</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">Assuming Gary Kinder's version of Elders' statement and Guido's And Yet They Fly version were right:</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">Dr. Walker did found many interesting properties. State 3 sample was analysed by Walter Walkers who found the dark granules (of pulverised state 3 sample) uniformly embedded through the solid chunk in \u201cfree\u201d state. The dark granules of pulverised state 3 sample were found to be non-metallic and angular shape which raised the question that if the alloy was created using normal melting process, the heat and abrasion would have rounded off their angular point edges, meaning the sample was created using an unknown method. Metal sample also oxidised very rapidly at even 16% humidity. The state 4 sample analysis revealed some sort of bonding of molecular contact in high vacuum. The same did not oxidized even though it contain same component element of state 3 sample. A summary of the interesting properties detected by Walker is presented later in this critic.Assuming that Walker could not associate above findings to unearthly origin and hence theorised the metal to be pot metal (refer Appendix A), such a statement is still quite generic and does not explain the anomalies, neither the behavior observed by Walker. In fact such statement, if originated from Walker, contradicts his own analysis. Moreover, he tested more than one sample at least, but it is mentioned ''\u201cAnd Elders reminded Stevens that a metallurgist at the University of Arizona had already examined '''one of Meier\u2019s metal specimens''' and labeled it 'potmetal' a low-grade casting alloy used to make such things as tin soldiers.\u201d ''So probability of Walker making such statement was minimal to non-existant. Probably some other metallurgist tested one of the samples in the gross manner that EMPA did.</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">Assuming Guido's And Still They Fly version is right:Metallurgist from Dubendorf would imply a metallurgist from Swiss lab EMPA located in Dubendorf. Such a comment is not there in report. Assuming it was verbally communicated, then it is to be noted that the investigators felt the need of additional tests after obtaining EMPA result. Welch's sentence indicate that till this point, only basic tests were run on the evidence (photos and metals in discussion) and certainly not the kind of tests they would have liked to run as conclusive analysis. During Vogel's analysis, Vogel was heard saying, that each section of the sample have to be analysed separately and an overall analysis was not enough. It is likely that because of this same reason, EMPA and Walker found slightly different composition for the samples. </div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">The \u201cpotmetal\u201d comment could also possibly originate from the graduate student from UCLA who kept the sample for 2 days, and declared that the sample is nothing unusual, but is mere speculation.</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">Note that Vogel also, while inspecting the stage 3 sample 4 remarks (part 3, 2:05 mark) that ''\u201cthe preliminary identification of this metal is copper, nickel and silver. Silver solder which is used for many forms of welding is a combination of Silver and nickel\u201d'', highlighting the similarity of the preliminary composition analysis to common cheap metal.</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">It is not conclusive who and why labeled the sample as pot-metal. Even if the above experts made such a comment, either they contradicted themselves, or insufficient tests were run. If Walker made the comment, he contradicted his findings big time. EMPA, and most likely, the unknown metallurgist from University of Arizona too, did not test the discrete parts of the sample, but did a general analysis. It is not know if the graduate student from UCLA did ran any serious tests, or he was really qualified for the same. </div>\n\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">IIG mentions:</div><div style=\"margin-left:0cm;margin-right:1cm;\"><span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">Originally a qualified metallurgist using spectrometry analysed the metal and the sample was revealed to be nothing more than a combination of ordinary silver and copper.\u201d</span></div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">Walker found Silver and copper for the sample number 6 from 5<sup>th</sup> stage using electronic spectrometer, as consistent with Swiss Lab. The rare element Thulium was found in sample 4 from 3<sup>rd</sup> stage, that too in a particular region. It is likely that the Swiss Lab did not examine all sections of the metal sample provided.</div>\n\n\n<div style=\"margin-left:0cm;margin-right:1cm;\"><span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">It was only after this disappointing result that the metal sample was then sent to the chemist Marcel Vogel who discovered an extraordinary composition for the metal using a scanning electron microscope.&nbsp; We know that it is scientifically impossible to determine the composition of an object simply using a microscope regardless of the magnification.</span><span style=\"color:#004586;\">\u201d</span></div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">IIG failed to mention full reason: </div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">Walker's analysis was not disappointing, rather interested the investigator to do more analysis. Tantalizing questions that rose from Walker analysis \u2013 how the meal was put together, unexpected outflow of gas from solid metal, possible oxidising agent in the composition, very quick oxidization at very low humidity, no remnant left of oxidized metal, etc. It was disappointing in the sense that while it highlighted several unusualness, it gave rise to more questions than answers. </div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">After Walker's analysis, Steven's mention in his 1982 preliminary report ''\u201cWe could see at this point that there are at least three more things we must do with these specimens. We should have an x-ray diffraction analysis and scanning electron microscope photographs ''to determine the structure of the alloy'' \u2013 how it is put together. We should also perform an energy dispersive x-ray examination and try to get a good quantitative analysis.\u201d ''</div>\n\nVogel never used microscope to determine composition. The photographs were used to determine the structure, and the spectograhs for elemental composition. Electron microscope is used for electron beam excitation in such an analysis set up. These are in Vogel's video for everyone to verify. \n\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">IIG mentions:<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">Finally, if there were a material that contained almost all of the elements in the periodic table it would very likely be radioactive and therefore extremely hazardous to your health.&nbsp; It is just not possible for such a material to exist in the first place.\u201d</span></div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\"><span style=\"background-color:transparent;\">This comment is present in Guido's And Still They Fly - </span><span style=\"background-color:transparent;\">\u201cone microscopic area revealed </span><span style=\"background-color:transparent;\">''\u2018an enormous m\u00e9lange of almost all of the elements in the periodic table''</span><span style=\"background-color:transparent;\">\u201d</span><span style=\"background-color:transparent;\">. It is explained before that this comment has no match from the Vogel analysis that is on video. This comment probably was a personal interpretation by Guido on the large number of trace elements detected by Vogel and commented on by the investigators. Such an inference by Mr. Guido or others without support from an expert analysis should be set aside as opinion only. Even the investigators did not cite \u201calmost all the elements\u201d anywhere when summarising the 9 exotic qualities of the sample (Preliminary report pp 426).</span></div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\"><span style=\"background-color:transparent;\">However, it is to be noted that radioactive material are more abundant than we think. Uranium, for example</span> is more common than tin, about 40 times more common than silver and 500 times more common than gold. It\u2019s found in very low concentrations almost everywhere on earth in soil, rocks, water and even in a typical back yard. A typical backyard, with dimensions of 10 metres by 10 metres and a soil depth of one metre, contains about 300 grams of uranium. A typical backyard is therefore slightly radioactive<ref>http://www.cameco.com/uranium_101/uranium-overview/radiation/</ref>. They key is concentration<ref>http://www.world-nuclear.org/info/Safety-and-Security/Radiation-and-Health/Occupational-Safety-in-Uranium-Mining/</ref>. Only above certain concentration level, radioactive materials are harmful. Just because a radioactive element is present in a material, does not always mean material is radioactive at harmful level. It may be present in trace amounts also.</div>\n\n= Part 2 \u2013 Second Attempt =\n\n<span style=\"color:#004586;\">''1.&nbsp;Material contains a wide range of elements of the periodic table.''</span><span style=\"color:#004586;\">&nbsp;Vogel incorrectly interprets the continuum Bremsstrahlung X-ray spectrum as the spectrum produced by many element bands close together. The Bremsstrahlung spectrum contains no useful information about the element composition of a given sample.</span>\n\nIvan mentions:<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">The evidence presented here was a spectrum obtained using Energy-Dispersive X-Ray Spectroscopy.&nbsp;This </span><span style=\"color:#004586;\">spectrum is discussed in Part 3 of The Metal Analysis video at the 7:12 time mark. Figure 1 shows the spectrum taken by Vogel. \u201c</span>\n\n<span style=\"background-color:transparent;\">The picture which Ivan posted to de-construct...was the crystalline part that yielded Silicon, Iron and Sulfur. Here, Dr. </span>Vogel mentioned Iron, Silicon and Sulfur. He did not present this as evidence of either \u201calmost all elements of periodic table\u201d or \u201cwide range of trace elements\u201d. Vogel indicated that he did not analyse other bands (hovering his pointer to the Bremsstrahlung zone). <span style=\"background-color:transparent;\">One probable reason is that Vogel wanted to avoid a discussion on Bremsstrahlung radiation with a non-expert and also it is possible that the section he pointed, what looks like Bremsstrahlung radiation, he suspected several overlapping peaks. Note also how the fall-off is very smooth, nearly missing any sharp spikes (with increasing energy, the emission intensity decreased smoothly, never going up to produce a peak). It would have been very difficult for Dr. Vogel to analyse this portion meaningfully as the distinction between what were genuine peaks and what were just Bremsstrahlung was blurred. Vogel suspected other elements in this region </span><span style=\"background-color:transparent;\">'''but did not analyse them.'''</span><span style=\"background-color:transparent;\"> </span><span style=\"background-color:transparent;\">On what basis Ivan inferred that Vogel used this spectrograph to justify wide range of elements and the same was linked with Guido's remark is not known. Refer [[#Part 1 \u2013 First Attempt \u2013 First Attempt]] also.</span>\n\n[[File:IIG_Metal_Deconstruction_-_video_part_3_screengrab_-_crystalline.jpg|300px|thumbnail|center|Analysis of crystalline part]]\n\n\n<div style=\"margin-left:0cm;margin-right:0cm;\"></div>Ivan mentions:<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">For example, the unidentified band at 6.45KeV in (b) is likely to be Iron; the band at 0.29KeV in (b) identified as Calcium by the computer is likely to be Carbon (0.277 KeV) from the Calcium Carbonate (CaCO3) known to be in the ore. Fig. 3 is a good example as to how the EDS X-Ray computer identification today still requires human intervention in the analysis of the results. This is an important fact that will be mentioned in the next section.\u201d</span>\n\nIvan only mentions half truth here. Important thing for EDS analysis is that one must understand how it gets labeled. If a match is found with characteristic emission, the Computer labels it on the screen itself. This is called auto-peak-detection [[#Appendix A \u2013 Important terms and procedures]. If and only if or when a non-perfect match is obtained, or a peak cannot be marked due to low peak to background ratio (Refer [[#Appendix A \u2013 Important terms and procedures]]), the Computer do not label and the spikes are represented with blanks, and the analyst marks these manually if required. \n\n[[File:IIG_Metal Deconstruction_-_screengrab_-_unmarked_peak.jpg|300px|thumbnail|center|Ivan's example of unmarked peak]]\n\nFor example, the spike in the sample graph above which Ivan shows, and for which he noticed a spike at 6.45 KeV (visually approximated) and comments it to be Iron, he did so because Iron has a strong K\u03b12 characteristics radiation at 6.403KeV. \n\n[[File:IIG Metal Deconstruction_-_screengrab_-_misidentified_peak.jpg|300px|thumbnail|center|Ivan's example of misidentified peak]]\n\nThen Ivan produces a spectrograph where to the very left, two peaks marked as Calcium (Ca, Ca) appears and which Ivan says would be Carbon. \n\nLet's see why EDS analysis may give erroneous results (e.g. as above). We are not considering the cases where a peak is left unmarked, as it was not the case here. We are only considering false identification of peaks or false positives (inaccurate analysis). The main categories are listed:# Human induced instrument error like wrong calibration, improper positioning, repeatability of focus, contamination, choosing lower P/B sensitivity, etc. \n# Error in correcting excessive deadtime and resulting peak shift.\n# Error due to relative intensity, i.e. low peak to background, resulting in a small spike from Bremsstrahlung being falsely identified as peak. Or setting a low threshold of peak to background, thus making the computer misidentify small bumps from continuum as peaks.\n# Analysis issues like sum peaks and most relevant being peak overlap. \n# Instrument limitation and susceptibility to misidentify certain closely spaced elements.\n\n\n\n\nRefer [[#Appendix A \u2013 Important terms and procedures]] for definition of deadtime, sum peaks, escape peak, peak overlap.\n\nLet's assume Ivan used an instrument that can effectively detect Carbon. \n\nCalcium has two inseparable peaks at 341.3 eV of L\u03b11 and L\u03b12 emission lines that always shows as one and one more peak of L1 emission line at 344.9 eV <ref>http://xdb.lbl.gov/Section1/Periodic_Table/Ca_Web_data.htm</ref>. In other words, there are 3 Calcium peaks in this region, but at best, shows as 2. <span style=\"background-color:transparent;\">Carbon, on the other hand, has a K\u03b11,2 peak at 277 eV <ref>http://xdb.lbl.gov/Section1/Periodic_Table/C_Web_data.htm</ref>.</span> Ivan was probably examining Dolomite, Ankerite or similar carbonate minerals of Calcium here. In such minerals, <span style=\"background-color:transparent;\">Calcium often has greater ratio by weight compared to Carbon. A closely spaced Calcium and Carbon peaks would sometime suppress the Carbon. In Ivan's example, one of the two distinguishable Calcium peaks are correctly shown, while the second peak masked the Carbon peak, thereby \u201comitting\u201d it from the auto-peak-detection [[#Appendix A \u2013 Important terms and procedures]]. So in this case, the omission of Carbon is probably due to peak overlap. </span>\n\nLet's look at a classic case of peak overlap in the same spectrograph. Look for K\u03b21 peak of Calcium at 4012 eV and find Calcium (Ca). Then look to the tallest peak which is also marked as Ca. There should be actually two markers of Calcium there for 3688eV for the K\u03b12 line and 3691 for the K\u03b11 line, but because K\u03b11 has greater intensity than K\u03b12 and closely spaced, the K\u03b12 line is overlapped by the K\u03b11 line of Carbon, in the same manner Carbon's line at 277ev is overlapped by one peak of Calcium. \n\nNote here that for peak overlap, the there need to be two peaks of different elements of for same element, where the taller peak masks the less intense hence shorter peaks.\n\nAlso note that Ivan \u201cknew\u201d that the ore he was testing contained Calcium Carbonate. He could understand that a Carbon peak at the 277eV should be present. Vogel did not \u201cknew\u201d the composition of the sample at hand. This theme will be expanded later in the critic. We will also analyse the possibility of peak overlaps for Thulium. We will also examine if a visual examination would have been helpful for Vogel. But for now we'll look at this case.\n\n\n<span style=\"color:#004586;\">''2. Material contains the rare-earth element Thulium.''</span><span style=\"color:#004586;\"> The EDS X-Ray spectrum shown by Vogel is Aluminium and not Thulium. This is concluded after Vogel's admission that the Thulium secondary bands were missing. Aluminium with traces of Silver is the best explanation for the spectrum shown.</span>\n\nIvan mentions: \n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">In particular, the band at 7.179 KeV is almost as strong as the 1.462 KeV band and must have necessarily appeared in Vogel's EDS scan if the element was indeed Thulium.\u201d</span>\n\nIvan failed to mention that Vogel did not find secondary bands of \u201cany elements\u201d in this analysis as mentioned in the preliminary report and we can also see from the spectrograph. and that included Thulium. This is very important.\n\nRefer Appendix B and compare with the spectrum obtained by Vogel, and you will find that similar to Thulium's secondary band, Bromine's secondary band which is almost as strong as the primary band, at 11.924 KeV is also missing that should have been detected also, but is absent from the spectral analysis. Similarly, Silver and Argon both showed up only once.\n\n\n[[File:IIG_Metal_Deconstruction_-_screengrab_-_Thulium.jpg|300px|thumbnail|center|Plain area part spectrograph that yielded Thulium as primary element]]\n\nNext, lets see why Ivan allege that Vogel mistook Aluminium for Thulium. For that, [[#Appendix B \u2013 Characteristics X-Ray of elements in discussion]] again have to be referred. Looking at Appendix B, one can see that Aluminium have the strongest characteristics band of 1.4867 KeV, which is not visually discernible from 1.4863 KeV secondary band, which is why Aluminium visually appears to be missing secondary band. And Aluminium's primary band at 1.486 KeV is close to Thulium's 1.462 KeV. Here, Aluminium and Thulium have a small characteristics spectral peak separation of 24 eV and that's why Evan insists that Vogel misidentified Aluminium as Thulium. \n\nCan Thulium be wrongly identified? \n\nFor an expert like Vogel, first cause (human error) is significantly reduced, though not eliminated. For an unknown sample, an argument that an expert has done mistake in calibration or tested the sample in a wrong manner, cannot be proved, so we have to take it at face value.\n\nHe would also have known how to correct for excessive deadtime which may result in peak shift.\n\nThe third issue (low peak to background) also can be ruled out since Thulium is shown as the major element and it is unlikely that this sample region with very sharp and tall peaks and near zero background can succumb to this error.\n\nPeak overlap due to one high intensity peak suppressing the low intensity peak, is also not applicable as we can see (Thulium is the major element and most intense peak). \n\nIn EDS analysis, it is the instrument assists in matching of the element by performing an algorithmic match of the characteristic emission with its database values. As mentioned before, this is called auto peak detection or identification [[#Appendix A \u2013 Important terms and procedures]]. There still remains a possibility that the instrument may identify one element in preference to another through its auto-peak detection algorithm <ref>http://www.geology.wisc.edu/~johnf/g777/Scanning/Newbury_2009.pdf</ref>. It is due to a combination of the shortcomings of the detector and the algorithm used for auto-peak-detection. In EDS analysis, the spectral resolution is poor and due to this finer study not possible. Another technique called the Wavelength Dispersive X-Ray Spectroscopy, or WDS analysis <ref>[http://mcff.mtu.edu/acmal/electronmicroscopy/MA_EDS_WDS.htm http://mcff.mtu.edu/acmal/electronmicroscopy/MA_EDS_WDS.htm]</ref> is used which was not further applied by Vogel. Due to low spectral resolution of EDS, the computer have to make certain assumption and out of many possibility to fit one element or an other element or a combination of elements to a peak, especially if the peak is of the wide type. Different software sometimes would produce different results. But how bad this is? In this case, the Thulium peak detected was tall and sharp and the possibility of computer error is still further reduced, hough still not fully eliminated. What if still the computer erred? I<span style=\"background-color:transparent;\">t is estimated</span> that for major elements, the EDS auto-peak-identification fails for about 3% of cases<ref>http://epmalab.uoregon.edu/Workshop3/Peak_ID_Workshop08-Handout.pdf</ref>. In other words, this is accurate for 97% of the cases.<span style=\"background-color:transparent;\"> Even though inaccurate result of 3% is considered very acceptable in practical life, it is considered pretty poor in scientific measurement. </span>\n\nBut in layman term, a well calibrated EDS operated by a trained expert can be used to predict major constituent elements correctly much more often than not. \n\nVogel used the auto-peak-identification as evident from his comment during his interview ''\u201c...Yes, we got this band here, '''this is the only one that matched in the spectral analysis in the computer''', but the secondary bands that are connected with it are not present\u201d''. He may have run repeat checks or additional verification, but is not known.\n\nSo when visual analysis is done? And should visual analysis be done by Vogel? \n\nVisual analysis is done for two cases. First, in cases if the algorithm is not fairly sure, the peak would be left unmarked, only for a manual identification to take place by an analyst, which does not happen in this case. Second, in case of characteristics emission of different elements in close spectral vicinity, all the secondary and minor peaks are used to obtain a curve. Then this curve is fitted in the spectrograph to eliminate or justify the possibility of the element auto detected, or to counter and justify another element. Secondary peaks were not present in the spectrograph obtained by Vogel as we can see from the graph and he could never have applied this technique.\n\nIvan's deconstruction of Vogel's mistaken element is a matter of opinion only and not an absolution as he presents. First, The computer marks Thulium and not Vogel (Ivan is betting on instrument error). Second, Vogel had little option to do a visual analysis. To assume one element instead of other because the latter is rare is scientifically wrong, especially for unknown sample composition. Finally, an expert of Vogel's calibre, assisted by Wie, would not do a careless job and do his best in eliminating other possibilities as much as permitted through the resources available to him. He would have carefully calibrated the instrument and may have run the test multiple times. His job was made difficult by the absence of secondary peaks, and he could not do a full curve fit along with the secondary peaks. \n\nEven for an expert like Vogel, possibility remains for instrument error, which are fairly common in EDS. It is fair to argue that a Wavelength Dispersive X-Ray Spectroscopy, or WDS analysis would have made the case for Thulium stronger, but:\n\n- EDS is better suited for qualitative analysis <ref>[http://www.ammrf.org.au/myscope/analysis/eds/qualitative.php http://www.ammrf.org.au/myscope/analysis/eds/qualitative.php]</ref>, i.e. identifying specimens where the constituent elements are unknown,\n\n- Vogel might not have had an instrument in his possession,\n\n- The sample disappeared as soon as he intended them to be shown to Haines. He had little time to subject them to finer analysis.\n\n\nIn conclusion, Ivan's allegation that Thulium was not found has little factual support, but banks heavily on instrument error. The way Ivan presents his debunking, as if he has found a mistake by Vogel is totally misleading. At best his allegation is a reminder that SEM EDS method error does happen.\n\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">The very small band immediately adjacent to the predominant band in Vogel spectrum may very well be traces of silver in the region scanned; it would be unlikely that it is argon or, as Vogel says, a combination of silver and argon. Since many elements have bands that overlap with those of other elements, it is absolutely necessary to manually check other possibilities before conclusions are made about composition in an EDS&nbsp;spectrum. It is quite possible that Vogel was deceived by the computer's output; indeed, as noted in the previous section, even today's far more capable computers misinterpret EDS data requiring human intervention for evaluation. \u201d</span>\n\nWhat basically Ivan says here that when the computer matches silver as silver, that could very well be the case, but when the computer matches Argon as Argon, Vogel should have manually double-checked for other possibilities. \n\nFirst, Ivan assumes Vogel and Wie were careless enough to state the presence of Argon and Thulium without trying their best within available resources to eliminate other possibilities. They might have taken multiple readings not stated in the video. Their job was complicated by absence of secondary bands.\n\nNext, the computer performs an algorithmic match of the characteristic emission and intensity with its database, then applies an algorithm to determine the likely element, whereas the graph that is displayed on screen might have lower resolution. <span style=\"background-color:transparent;\">Thus, the eye can be more often betrayed and not the computer. Visual analysis always comes with a human judgement factor that can be biased. As explained before, in EDS analysis, human judgment from visual examination of graph comes in when an element is detected when there are other possibilities of peaks at close spectral range (like this case), then, the secondary bands are also considered which in this case was absent for the elements. When the secondary peaks are not present/probable, human judgment on what elements may be present is of little use. E.g. Thulium is not present and Aluminium is present just because Thulium is rare or improbable is no logic at all. Same for Argon. </span>This speculation by Ivan too, banks on probable instrument error.\n\n\n<span style=\"color:#004586;\">''3.&nbsp;Material did not require gold coating for SEM imaging.''</span><span style=\"color:#004586;\">&nbsp;Gold coating in SEM is used exclusively when the sample is non-conducting.</span>\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">Vogel considers extraordinary that the sample did not require metal coating for SEM imaging. \u201d</span>\n\nVogel remarked that the sample did not require gold coating, but this alone, in no way make the sample remarkable, neither the investigators infer good conductivity as a pointer to extraterrestrial origin of the metal samples. \n\nThis particular comment is taken from the section wherein he investigates one crystal part of the sample using a technique called Field Emission micrography. Refer [[#Appendix A]] for details.\n\nHe mentions ''\u201cAnd this is now a scanning electron micro-graph of A1 area and this is A2. His is 500 diameters and this is now this area here (pointing to an area within A1) blown up to 2000 diameters. This is Field Emission Microscope so one gets then a very very high degree of depth of field. The specimen was not touched, which means I did no gold-plating, no metalization of the sample, so it was left alone and what exited me was a tremendous ability to get a depth of field in the specimen without ion burning, in other words, the electron beam did not accumulated, this surfaces acted as conductors and gave us a very sharp delineation of the picture. Normally you have to take and cover this with gold in order to get a sharp picture.\u201d ''<ref>[http://en.wikipedia.org/wiki/Field_emission_microscopy http://en.wikipedia.org/wiki/Field_emission_microscopy]</ref>\n\nVogel was exited because in general crystals (except metallic crystals, or simply metals) are bad conductors of electricity <ref>http://www2.ucdsb.on.ca/tiss/stretton/CHEM2/arch20.htm</ref>. Metals have free electrons that can bounce from one to another hence the 'flow' of electrons <ref>https://www.boundless.com/chemistry/textbooks/boundless-chemistry-textbook/liquids-and-solids-11/types-of-crystals-87/metallic-crystals-386-7955/</ref>. But things like table salt (examples of ionic crystals), are so tightly bound together, that the electrons don't leave their spot easily. Similarly, other types, like diamond (example of covalent crystals) are also non-conducting. <span style=\"background-color:transparent;\">Molecular crystals like water, again are also non-conducting.</span> That is why Wendelle in his preliminary report (pp425) comments'' \u201cA photomicrograph picture shot of this reveals unusual clarity indicating unusual conductivity of the electrons illuminating the image\u201d'' and thereafter comments ''\u201cWe have exceedingly pure metal in one part of the specimen and '''non-metallic''' '''highly conductive crystals''' in other\u201d''. His comment is to be interpreted as \u2013 the whole sample in its discreet form, whether metallic or crystal, was highly conductive and especially the excellent conducting property of the non-metallic crystal part was unusual. \n\n\n<span style=\"color:#004586;\">''4. Portions identified as metal exhibit crystal birefringence. ''</span><span style=\"color:#004586;\">The optical microscopy methods used by Vogel are not suitable to conclusively demonstrate that some portions of the sample exhibit optical birefringence.</span>\n\n<div style=\"color:#004586;\">\u201cThroughout the videos, Vogel uses an optical microscope under different illumination conditions and settings to show different portions of the sample. The conditions mentioned are Normarski Phase Interference, Cross-Polarization, and Oblique illumination. He also focuses and defocuses the sample\u201d</div>\n\n<span style=\"color:#000000;\">Refer [[#Appendix A \u2013 Important terms and procedures]] for definition of birefringence. Also note that Vogel was an expert on crystals and would have been very competent in inspecting crystals through microscope. He would have dealt with both isotropic and anisotropic crystals. </span>When the properties of a material are the same in all directions, the material is said to be isotropic. Alternately, when the properties of a material vary with different crystallographic orientations, the material is said to be anisotropic. Birefringence is a result of optical anisotropy. \n\nIvan here challenges Vogel's method of identifying optical birefringence. Vogel examines the sample under optical microscope with the sample exposed to polarized light. From Wikipedia we read (copying directly from Wikipedia) <ref>[http://en.wikipedia.org/wiki/Birefringence http://en.wikipedia.org/wiki/Birefringence]</ref>:''\u201cPolarized light microscopy can mean any of a number of optical microscopy techniques involving polarized light. Simple techniques include illumination of the sample with polarized light. Directly transmitted light can, optionally, be blocked with a polariser orientated at 90 degrees to the illumination. More complex microscopy techniques which take advantage of polarized light include differential interference contrast microscopy and interference reflection microscopy.''\n\n''These illumination techniques are most commonly used on <u>birefringent</u> samples where the polarized light interacts strongly with the sample and so generating contrast with the background. Polarized light microscopy is used extensively in optical mineralogy. Polarized light microscopy is capable of providing information on absorption colour and optical path boundaries between minerals of differing refractive indices, in a manner similar to brightfield illumination, but the technique can also distinguish between isotropic and anisotropic substances. Furthermore, the contrast-enhancing technique exploits the optical properties specific to anisotropy and reveals detailed information concerning the structure and composition of materials that are invaluable for identification and diagnostic purposes.\u201d''Now what is differential interference contrast microscopy? It is also known as Nomarski Interference Contrast (NIC) or Nomarski microscopy. Again refer to the Wikipedia article on same topic and I copy from the same wikipedia article describing the light path in such a setup and point number 2:\n\n''\u201c2. The polarised light enters the first Nomarski-modified Wollaston prism and is separated into two rays polarised at 90\u00b0 to each other, the sampling and reference rays.''\n\n''Main article: Wollaston prism''\n\n''Wollaston prisms are a type of prism made of two layers of a crystalline substance, such as quartz, which, due to the variation of refractive index depending on the polarisation of the light, splits the light according to its polarisation. The Nomarski prism causes the two rays to come to a focal point outside the body of the prism, and so allows greater flexibility when setting up the microscope, as the prism can be actively focused. \u201c''\n\nA Wollaston prsm is used in a Nomarski interference contrast (NIC) setup<ref>http://en.wikipedia.org/wiki/Wollaston_prism</ref>.\n\nCross polarised light is a term used to describe the state of a polarising microscope when both the lower and upper polariser are inserted. Polarised light is light that vibrates only in one direction. The lower polariser causes the incident light on a section to vibrate usually in the E-W direction. The upper polariser only allows light vibrating in the N-S direction to pass. With no mineral specimen in the path of the light, no light will pass through the upper polariser, also known as the analyser. Optically anisotropic minerals in the path of the incident rays, however, split light into two rays that when recombined at the analyser can interfere and pass through. Thus optically anisotropic materials appear bright or relatively bright in the background of optically isotropic material. In other words, cross polarization is a technique for inspecting optically anisotropic materials (or birefringent material).\n\nA tutorial found [[http://microscopyu.com/tutorials/java/polarized/polarizerrotation/index.html here]] explain the effect of rotation on a birefringent material (need to install Java to view):\n\nIn the tutorial you will learn first hand how the intensity of polarized light, angle of incidence and focus are used simultaneously to observe behaviour of birefringent material under polarised light.\n\n\n[[File:IIG_Metal_Deconstruction_-_tutorial_-_Polarizer_rotation.JPG|300px|thumbnail|center|Effect of Polarizer rotation, intensity and Focus on birefringence sample tutorial]]\n\nIvan shows an example side by side comparison between <span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">Same region of Vogel sample viewed under the microscope (a) ordinary illumination (b) combination of polarized light and Nomarski.\u201d </span>and comments <span style=\"color:#004586;\">\u201cWhen a microscope is used in this way, a sample will show all sorts of details and visual effects, as shown in Fig. 8. It is not difficult to make features in a sample stand out if the proper adjustments are made.\u201d</span>\n\n<span style=\"color:#000000;\">Read above. Polarized light and Nomarski technique are used in polarized micro-examination for birefringence materials. Ivan then simply shows a picture comparison of a sample that </span><span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">was made by rubbing a pellet of aluminium onto the surface of a silicon wafer\u201d.</span><span style=\"color:#004586;\"> </span>Ivan completely looses the context. He compares a material scratched with aluminium with obvious scratch marks to that of a birefringent material which needs inspection under polarised light. What he means basically is that Vogel might not have differentiated between a scratched non-birefringent material vs real birefringent material. The fact is, any crude manipulation would also have been evident under optical microscope if not naked eye. No such scratch marks were obvious through video. \n\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">In Part 2 at the 3:21 time mark, Vogel interprets the bright region as evidence of metal birefringence. This is shown in Fig 9. To obtain these images, he either rotates one of the illumination polarizers or adjusts the Wollaston prism in an optical microscope equipped with Nomarski analysis setup.</span>\n\nSuch rotation of polarizers and adjustment of Wollaston prism are integral to inspecting a birefringent sample. The effect of rotation of polariser is explained in above tutorial. Wollaston prism separates polarised light into two polarized outputs separated by an angle<ref>[https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=917 https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=917]</ref>. Wollaston prisms are commonly used in rotation mounts. A demonstration of use of Wollaston prism is available [[https://www.olympus-lifescience.com/en/microscope-resource/primer/java/dic/wollastonwavefronts/]] (requires Java).\n\n\n[[File:IIG_Metal_Deconstruction_-_tutorial_-_Wollaston_Prism.jpg|300px|thumbnail|center|DIY Wollaston prism property]]\n\nThe same link can be referred to verify how such a setup is used to illuminate a birefringent sample for examination.\n\nAt this mark, Vogel examines the silvery specimen at 4th stage, and he rotates the analyser (not the polarizer as Ivan asserts) while examining the specimen on the stage with fixed magnification. When the transmission axes of the analyser and polarizer are crossed at an angle (90 degrees), maximum specimen birefringence is observed (maximum extinction of non-birefringent part). This is because no light from the non-birefringent part of the sample is accepted by the analyser at this stage, however the region possessing birefringence couple some of the polarized light in one direction into other, therefore will not loose its brightness fully, but rather \u201cappear\u201d bright against the dark background.\n\nVogel also discovers birefringence at a higher magnification using SEM. Refer same video 6:35 mark.\n\n\n<div style=\"color:#004586;\">These results are either the result of Fresnel reflection or Normarski phase interference microscopy [5]. Fig. 10 shows the application of Nomarski phase interference microscopy on given metal sample. \u201d</div>\n\nIvan does not elaborate how above-mentioned effect would cause it. However, Fresnel effect is the observation that things get more reflective at grazing angles. An example would be that if you look straight down from above at a pool of water, you will not see very much reflected light on the surface of the pool, and can see down through the surface to the bottom of the pool.&nbsp; At a glancing angle (looking with your eye level with the water, from the edge of the water surface), you will see much more secularity and reflections on the water surface, and might not be able to see what's under the water. \n\nA simple yet beautiful demonstration is available in youtube<ref>https://www.youtube.com/watch?v=F-2cUWUe0fY</ref>.\n\nNote here that the viewing angle changes and no polarized light is required to test this.\n\nIn a Nomarski DIC set up examining a non-birefringent set up will enhance the contrast at the region interface (edges). Ivan then gives an example in Figure 10 of his deconstruction update and asserts that the effect is similar, when it is not. Figure 10 from Ivan's deconstruction update is reproduced below.\n\n[[File:IIG_Metal_Deconstruction_-_Reference_-_Fig10_Nomarski.jpg|600px|thumbnail|center|Figure 10 from Ivan's metal deconstruction update]]\n\nIn Figure 10 of Ivan's deconstruction, the diagonal strips (edges) appear bright from previous dark while the previously comparatively brighter areas occupying majority of the sample's bottom left and top right portion looses brightness. This behaviour is quite natural with Nomarski DIC and does not indicate birefringence. A Nomarski DIC setup will ensure that the split light beams at the edges will either interfere destructively producing dark spots/lines, or constructively, producing bright spot/lines <ref>[https://www.youtube.com/watch?v=TKTGgAQ2VEs https://www.youtube.com/watch?v=TKTGgAQ2VEs]</ref>. <span style=\"background-color:transparent;\">The effect shown in the example is localized along the edges as shown above, i.e. not identical to behavior of birefringent sample i.e. birefringent area retains full or part brightness while non-birefringent area looses illumination completely.</span>\n\nAn edge detector algorithm on Ivan's left side image from Figure 9 (Figure 10 in Ivan's update) identifies the edges (see below). Note carefully how the edges of the circular protrusions and the cramps at the edges are illuminates, leaving the inside dark, i.e. the lines are actually 2 parallel lines and the circles are hollow circles. Then compare with the right side image from figure 10 of Ivan's deconstruction and check that these same edges are illuminated highlighting the parallel lines and hollow circles.\n\n[[File:IIG_Metal_Deconstruction_-_Reference_-_Edge_Enhanced_DOG_Analysis.jpg|600px|thumbnail|center|Edges detected in Ivan's sample by Difference of Gaussians algorithm by Photo software GIMP]]\n\nThen compare with Vogel's image which is much more complex and not related to edge illumination. The depositions showing birefringence here is much more thick and not just the edges. \n\n[[File:IIG_Metal_Deconstruction_-_Reference_-_Non_birefringent_area.JPG|300px|thumbnail|center|Highlighting the non-birefringent areas. Note also the illuminated birefringent areas]]\n\nThe same edge detection algorithm was ran on Vogel's sample and is reproduced below (notice the edges)\n\n[[File:IIG_Metal_Deconstruction_-_Reference_-_Edge_Enhanced_DOG_Analysis_2.jpg|600px|thumbnail|center|Edges detected in the sample by Difference of Gaussians algorithm by Photo software GIMP]]\n\nNow compare the above 2 figures, and note how it's not just edges that are illuminated.\n\nIvan also omitted Dr. Vogel's analysis of other even more complex segments. He points out birefringence in all the sample he tested (gradually diffused from lower to higher stage material), and a couple are shown below:\n\n<span style=\"background-color:transparent;\">Looking at the first specimen from 4</span><span style=\"background-color:transparent;\"><sup>th</sup></span><span style=\"background-color:transparent;\"> stage, in tape 2 right in the beginning, Vogel points out birefringence. This specimen was polished: </span><span style=\"background-color:transparent;\">\u201cIt is silvery as you can see in colour. It looks like it has been melted. This is the last specimen which was <muffled> in plastic, <muffled> and </span><span style=\"background-color:transparent;\">polished in Switzerland and now you can see this metal in its pristine state\u201d.</span>\n\n<span style=\"background-color:transparent;\">Then in another instance, looking at the fifth specimen belonging to silvery 4</span><span style=\"background-color:transparent;\"><sup>th</sup></span><span style=\"background-color:transparent;\"> stage metal, Dr. Vogel comments \u201cWe are now looking at a silvery metal fifth specimen number 5 at the 4</span><span style=\"background-color:transparent;\"><sup>th</sup></span><span style=\"background-color:transparent;\"> stage of development, that is used according to the document that was given to me in the preparation of the spacecraft. We are looking at the object now which is being <muffled> and </span><span style=\"background-color:transparent;\">polished, under cross field polarized light using a 250W Cesium Iodide light source\u201d.</span>\n\nVogel then points out pockets of white birefringent sub-area in otherwise non-birefringent dark area (see below). Also note the difference between this area, and the effect duplicated by Ivan by scratching one metal with another. This sample is remarked as being polished.\n\n[[File:IIG_Metal_Deconstruction_-_Reference_-_Diffused_birefringence.jpg|600px|thumbnail|center|Diffusion of birefringent areas in 5th specimen in otherwise non-birefringent specimen (non-illuminated majority). Poor video quality.]]\n\n<span style=\"background-color:transparent;\">Vogel also describes birefringence characteristics of the 5</span><span style=\"background-color:transparent;\"><sup>th</sup></span><span style=\"background-color:transparent;\"> stage sample number 6 in part 4 of the video staring 6:00 minute mark, but the video is too dark to be analysed/verified.</span>\n\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">In this case, the effect is entirely due to the particular topography of the surface and, though the effect is similar to that shown in Fig 9, it does not constitute evidence of metal birefringence or any other exotic or unknown property.\u201d</span>\n\nIvan suggests hypothetically that the \u201ceffect\u201d of birefringent material can be duplicated by non-birefringent samples, which is wrong <ref>[http://en.wikipedia.org/wiki/Polarized_light_microscopy http://en.wikipedia.org/wiki/Polarized_light_microscopy]</ref> <ref>[http://en.wikipedia.org/wiki/Birefringence#Measurement http://en.wikipedia.org/wiki/Birefringence#Measurement]</ref>. To the eye they may appear similar (though not same), a trained expert will never make a mistake. By suggesting that Vogel and Wie could have mistaken between a metal scratched with Aluminium or an improper deposition of a thin film of discrete metal with an uneven topography is not supportable since even at lower magnification if not through naked eye such manipulations are visible, moreover, such report is not made by Walker or EMPA. The other possibility which Ivan might have hinted here is gross incompetency if not outright dishonesty especially from Walker, Vogel and his associate. Ivan goes into this theme much more vigorously in the third attempt.\n\n\n<span style=\"color:#004586;\">''5. Portions of sample examined at a magnification of 500 diameters show evidence of micro-manipulation.''</span><span style=\"color:#004586;\"> It was found that indentations similar to those found by Vogel can be produced by conventional metal machining. The indentations have a pitch small enough to be captured with a scanning electron microscope at a 500 diameter magnification.</span>\n\n\nIvan compares 2 images: Ivan forgets that the micro-manipulation was detected not throughout the 4-5 mm wide sample, but in a particular area. Vogel says \u201cAnd now we are going into his area, this plain, right in this region and we found evidence of what looked like mechanical manipulation.\u201d\n\n[[File:IIG_Metal_Deconstruction_-_Reference_-_Fig11_from_deconstruction.jpg|600px|thumbnail|center|Figure 11 from Ivan's deconstruction update]]\n\nVogel at this stage is looking at a region perhaps no wider than perhaps 1mm by 1mm (or less) and the photograph is probably representing only a section of this area. Vogel could not find this everywhere within the sample. This area is the plain area as we see in the video, to the upper right region of the middle, with no exposed edges. This small region within a small sample was manipulated in a diagonal pattern criss-crossed by parallel pattern (what Vogel describes as \u201cploughed\u201d).\n\nIvan reproduction is probably a result of improper or rough polishing or metal cutting performed in a machine shop. Ivan in his 2012 deconstruction published in openminds.tv, later claimed that his sample had this feature in one particular area only. Semi-imprecise polishing of a sample, may produce such patterns, consistent with the grit of the abrasive. Metal cutting may produce this pattern, wherein due to imperfection of the cutting tool, different regions will have different abrasions and the sample will develop patterns which may vary. Ivan does not elaborate the size of his sample, what was used for cutting, if other regions had completely smooth areas or showed other patterns, did this pattern appeared on an area approximately of 1mm by 1mm or in similar scale, was polishing employed wholly or selectively, etc. Until he reveals these questions, the means and motives of Mr. Meier to do the same cannot be ascertained. \n\nThe patterns in the sample tested proved that some sort of mechanical manipulation was carried out on a very selected area of the sample. Convention metal machining produce patterns are developed over relatively larger area from which a small chunk can be cut out. But how it can be tightly integrated or fused discretely, in the complex manner as it is shown, to other metallic and non-metallic crystalline material? Why other parts of the sample did not show this pattern? Was a precision method used for machining? Few companies provided laser working tool service for industries and defence companies in the 70's, but such a manipulation by Meier would leave out witnesses in the open. Or some other techniques? If the technique followed by Ivan was used, did Meier had the equipments and the means to perform the same, and how did he applied the polishing or cutting technique in a very small area? \n\n\n<span style=\"color:#004586;\">''6. Statements made to the effect of how these metal samples are unusual, extraordinary, difficult to fabricate, etc.''</span><span style=\"color:#004586;\"> All of these are Vogel's own opinions and they are not supported by the evidence he presents. It is also not clear why the claims, even if true, would make the metal samples remarkable or worth studying.</span>\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">In a nutshell, the notable claims of this sample are that it contains a wide range of elements, the hard-to-</span><span style=\"color:#004586;\">obtain element Thulium, and metal crystals exhibiting birefringence. All of these claims are in themselves not remarkable or notable. Thulium, though rare, was available in the 80s and there is no reason that a metal in crystal form would not exhibit some degree of birefringence. A sample can be made to contain many elements of the periodic table without using \"cold fusion\", as Vogel suggests. Thus, even in the case that all of the claims about Meier's samples are correct, it still is not clear why these would make them remarkable. However, it would be interesting if the elements shown were all chemically bonded, but Vogel presents no evidence and performs no test that would lead to establish chemical bonding or alloying between them.\u201d</span>\n\nWith all of Ivan's claim refuted or disputed, it is apparent that Ivan's claim have no support.The unusualness of the sample is commented by Vogel is not alloying (which is done by melting), but the presence of these elements in discrete regions and with distinct boundaries between the regions (no evidence of melting in a furnace). Sample can be made to have many elements, but it is the combination and how they were put together that intrigued Vogel and Walker. Vogel sums up neatly at the end of part 4 - \u201cRight now I could not explain the type of material that I have in its discreteness, by any known combination of materials. I could not put it together myself, as a scientist. To get a combination of Thulium, Silver and Silicon, in discrete areas \u2013 yes, if I were to melt it together, I would see the evidence of all of it, but its discreteness is what intrigues me.\u201d\n\nBelow is a table illustrate the unusualness of the samples, but few may be missed. Most of the findings by Vogel are on video except EDS spectra of Rhenium and his tests on determination of the unusual grain pattern (additional clear images or video is absent). Also any x-ray diffraction analysis is omitted from the interview video.\n\n\n{| style=\"border-spacing:0;width:17.022cm;\"\n|-\n! align=center style=\"background-color:#dddddd;border-top:0.1pt solid #000000;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Property\n! align=center style=\"background-color:#dddddd;border-top:0.1pt solid #000000;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Detected By\n! align=center style=\"background-color:#dddddd;border:0.1pt solid #000000;padding:0.097cm;\" | Earth Occurrence\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Presence of chlorine in alloy was unusual as chlorine turns to gas at much lower temperature than other metal's melting point that were detected\n\n(EMPA report and preliminary report pp 420 and 423)\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | EMPA\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown \n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Non-metallic material existing discretely in \u201cfree state\u201d and tightly bound in the metal mass (preliminary report pp 415)\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Walker, further corroborated by Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Uniform and Sub angular shaped non-metallic indicated a joining process not involving heat and abrasion in the liquid metal (preliminary report pp 415). No ash or heat residue detected by Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Walker further corroborated by Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Unexpected outflow of gas given out by metal sample when slicing thin when mounting in lucite crystal for microscopic examination (preliminary report pp 415)\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Walker\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Very rapid oxidation at low humidity, possibility of oxidizing agent in the sample, no remnant of oxidised residue\n\n(preliminary report pp 419)\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Walker\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Evidence of Micro-manipulation detected in an area of a sample\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Difficult \n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | No secondary bands of characteristic emission for all the element in the mix\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Extremely high conductivity of the non-metallic crystal part of sample\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Vogel. Walker also found the sample overall very conductive.\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown.\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Birefringent metal part\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown.\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Purity of elements evident by sharp spectral peaks, and that included Thulium.**\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Difficult\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | All elements registered only primary band \n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Presence of Rhenium in sample\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Difficult\n|-\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Strange grain patterns (horizontal, sandwiched between vertical grains)\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:none;padding:0.097cm;\" | Vogel\n| style=\"border-top:none;border-bottom:0.1pt solid #000000;border-left:0.1pt solid #000000;border-right:0.1pt solid #000000;padding:0.097cm;\" | Unknown\n|-\n|}\n\n\n<nowiki>**</nowiki>Thulium does not occur naturally in pure form, and was prohibitively costly in the 70's. Recent discoveries have reduced the rarity of Thulium to about that of gold or Silver <ref>http://www.molycorp.com/resources/the-rare-earth-elements/thulium/</ref>, but in pure form remain hard to procure and relatively costly. \n\n\nIvan gives his own list of properties he would like to see, instead he should explain the properties listed above. Perhaps Ivan himself knows that these properties are unique and that's why in his third attempt, he goes on attacking mode, describing how the \u201ceffect\u201d can be \u201cduplicated\u201d in crude manner, and thereby accusing the above scientists of being co-conspirators with Meier.\n\nThe author feels due attention should be given to review the Vogel tape by highly qualified and unbiased metallurgists and chemists. A review with the intention of debunking will produce silly arguments.\n\n= Part 3 \u2013 Third Attempt =\n\n\n\nIvan mentions:\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">1. Samples contain almost all of the elements of the periodic table.</span>\n\n<div style=\"color:#004586;\">2. Samples contain the hard to obtain element Thulium with its secondary bands missing in the EDS spectrum.</div>\n\n<div style=\"color:#004586;\">3. Inclusions in the metal sample exhibit birefringence, which is found in non-metallic or dielectric crystals.</div>\n\n<div style=\"color:#004586;\">4. Sample examined at a magnification of 500 diameters show signs of micro-manipulation or micro machining.</div>\n\n<span style=\"color:#004586;\">The claims above have direct data associated to them. Notice that many of the claims that Vogel made are secondary and derive from conclusions he reached from the propositions listed above.\u201d </span>\n\nMost of what Ivan alleges are repeats from previous attempts, but there are a few novel of them, requiring additional explanation. In the third attempt, Ivan's deconstruction is even more based on \u201cduplicating\u201d the effect, then the First and Second effort, and thus Ivan strongly suggests Vogel's complicity in manipulating the results since the effect can be \"duplicated\". In Ivan's own word ''\u201cThe intention of this article is to show that Vogel\u2019s main claims can be scientifically verified based on his own data and that his results can be reproduced out of ordinary materials.\u201d'' \n\n\nIvan compares Vogel's detected spectrum from the crystal part:\n\n[[File:IIG_Metal_Deconstruction_-_Reference_-_Crystal_spectrum_reproduction.jpg|600px|thumbnail|center|Ivan's reproduction of Vogel's detected spectrum for the crystal part]]\n\nand comments\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">Given the similarities of the two spectra above, it can be deduced that the evidence for all the elements present in the sample can be reproduced by a sample consisting of virtually a single element which, in this case, was a pellet of ultra-pure nickel.\u201d</span>\n\nThe characteristic spectrum is called \u201ccharacteristic\u201d, because the spectral peaks of each elements are \u201cunique\u201d. So no two spectral analysis are same unless the samples are composed of same constituent elements and same ratio/weight, as evident even from the visual comparison of the two. What Ivan shows here is the Bremsstrahlung continuum. Similar spectrograph as what Ivan produced can also result out of a pile-up issue with other elements. Refer part 2 on detail critic on Ivan's debunking of this spectrograph that Vogel obtained from the crystalline part of the sample. \n\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">Fig. 3 shows a screen-shot of Vogel\u2019s EDS spectrum where he identifies Thulium and other elements. Here, it is pointed out that the secondary bands of Thulium are not present, which is further used to speculate that the material was put together by unknown methods (e.g. cold fusion).\u201d</span>\n\n\nAbsence of secondary band was one of the preliminary symptom, and it led to speculation that it was put together in an \u201cunknown process\u201d (cold fusion is not speculated at this stage). Non-electric cold fusion method was suspected because there was no ash and no heat residue. Another driver to this theory was presence of chlorine, whose boiling point was much less than the other constituent metals/elements (also other trace metals like Bromine and Argon). \n\n\nLater, the deduction that it is made from cold fusion or similar process is supported by a remark made by Vogel while examining first sample (video is dark), belonging to the 3<sup>rd</sup> stage material, \u201cNow we can see banded structures in the centre of the field like flow lines as one would encounter in lava like flows. The material looks like it has been extended in a flow process, but it does not show what one would see in a furnace from extensive heating. The remark '''has been made''' that this specimen has been made by a cold flow process\u201d. \n\n\n<span style=\"background-color:transparent;\">Although the video is dark during this comment, another example of what Vogel sees here also can be seen in the 9:14 mark of the video when Vogel comments </span><span style=\"background-color:transparent;\">''\u201cThere is a complete pattern of material flowing in and precisely stopping. Here one can see a better detailing of this. It's like the material has been kneaded and </span><span style=\"background-color:transparent;\">rolled over and flowed together.\u201d''</span>\n\n\n[[File:IIG_Metal_Deconstruction_-_Screengrab_-_Lava_like_flow.JPG|300px|thumbnail|center|Lava like flow']]\n\n\nOn the distinct areas, Vogel remarks on the video many times, couple of which are shown below:\n\n[[File:IIG_Metal_Deconstruction_-_Screengrab_-_Part_4_4m44s.jpg|300px|thumbnail|center|From Part 4, 4:44 mark]]\n\n\n[[File:IIG_Metal_Deconstruction_-_Screengrab_-_Part_2_1m04s.jpg|300px|thumbnail|center|From Part 2 1:04 mark]]\n\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">The spectrum shown in Fig. 4 below was produced with a sample made by manually placing a small flake of Silver on top of Aluminium.\u201d\u201cThe striking similarity between the two spectra in Figs. 3 and 4 is evident and, thus, what Vogel observed was not the hard-to-obtain Thulium, but rather the very-common element Aluminium with some traces of </span><span style=\"color:#004586;\">Silver [4].\u201d</span>\n\n\n[[File:IIG_Metal_Deconstruction_-_Reference_-_Duplicated_effort_2.jpg|600px|thumbnail|center|Ivan compares his duplicated effort with Vogel's spectrum with the plain part (Figure 4 in Ivan's deconstruction)]]\n\n\nAgain, the manipulation done by Ivan is not-to-miss crude kind.<span style=\"background-color:transparent;\"> If Vogel knowingly ignored such crude manipulations, and Ivan's theory is to be hold true</span><span style=\"background-color:transparent;\">e, then Vogel and Wie were complicit in falsification and nothing less. But even such a scenario have problems \u2013 t</span>he peaks appear visually similar, but they are not same \u2013 as written above, they are \u201cunique\u201d spectral characteristics. In Dr. Vogel's analysis, it is the computer that marks Thulium, not Vogel. In Part 2 it is explained how Ivan's allegation only highlights a probability (that the instrument may err) and not matter of fact. Secondly, how on earth Vogel suppressed the secondary bands of all the elements? \n\n\nNote here one particular interesting aspect of the spectrograph produced by the plain area of the sample that constituted Thulium as its primary element. In Vogel's analysis, only 1 peak each from Thulium, Bromine, Argon and Silver are present. \n\n\nNow look at Ivan's spectrograph. The peaks are sharp and clear like Vogel's with low background, probably because Ivan did use a pure sample, like Vogel had in his hand. The Aluminium peaks at 1486.3 eV and 1486.7eV are overlapped, so they show as one, but 4 out of 5 major and minor Silvers peak ranging from 2633.7eV-3347.4eV were detected by Ivan's EDS analysis. Now note that Argon also has as many 3 peaks at this range, not to mention a host of other elements. The peak mix at this range is reproduced below. Ivan's EDS analysis auto-peak-detection did not confuse between Silver and Argon peaks even though they are in close spectral proximity. Neither it got confused between Silver and Tellurium (Te), or between Silver and Molybdenum (Mo) or between Silver and Ruthenium (Ru) Silver and Thorium (Th). Goes to show that EDS is not as unreliable tool to do spectral analysis as Ivan makes it. \n\nThere are instance EDS analysis cannot identify elements or gives false positives, but those are results of not only closeness of peaks, but such peak shifts and/or false positives occur due to specific reasons. Just because there is probability of another elemental peak in the spectral vicinity, it cannot be stated that peak A was actually peak B, that too when secondary emissions were absent, and neither because the detected element was rare. Absence of secondary peaks deprive the analyst to do a manual curve fit in order to cross check the element detected. WDS method is recorded for finer analysis for elemental composition, because in science even 3-5% inaccuracy is a lot. But at the same time, such arguments that Aluminium was detected instead of Thulium just because they \u201clook similar\u201d and the peaks are close enough is just the straw man argument we don't need. Even if they look similar, the characteristic lines are \u201cunique\u201d and the computer marked Thulium and not Aluminium because the characteristics spectrum energy and intensity matched Thulium and not Aluminium <ref>http://www.seallabs.com/how-sem-eds-works.html</ref>. Unless instrument error is proven, which is nearly impossible for an unknown sample, by looking at the spectrograph, such comments are nothing but pure opinion.\n\n[[File:IIG_Metal_Deconstruction_-_Reference_-_All_spectrum_Ag_Ar.jpg|600px|thumbnail|center|All spectrum from 2.6KeV to 3.3KeV range. Silver marked in yellow and Argon in green]]\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">The Aluminium and Silver of the sample in Fig. 4 are obviously not bonded or alloyed and yet the sample still produces an EDS spectrum identical to Vogel\u2019s.\u201d</span>\n\n\nThe novelty of the sample tested by Vogel was that it was not alloyed, not crudely placed on top, not melted, but that the non-metallic material part were existing discretely in \u201cfree state\u201d and tightly bound in the metal mass. No evidence of melting were found. The experts speculated a cold fusion process. <span style=\"background-color:transparent;\">Reproduction by Ivan has no value.</span>\n\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">It is common for a computer analyzing EDS spectra to mistake between elements whose energy bands lie close to each other. This explains why the computer also identified Bromine and Argon in Vogel\u2019s spectrum as they too possess energy bands close to Aluminium and Silver.\u201d</span>\n\n\nIt is common, but it does not mean such mistake occurred. Ivan has no way to verify if a false positive occurred, especially when secondary bands were absent. Here is what Ivan did \u2013 he unreasonably justified Bromine and Argon false positive on the basis of a probable Thulium false positive. Then, he tried to duplicate the visual chart that Vogel's instrument rendered by placing a small flake of Silver on top of Aluminium plate. As an engineer, Ivan should know the uselessness of a \u201cvisually similar\u201d spectrograph.\n\n\nFirst, false positive of Thulium is a probability, not a fact. Second, false positive of one element cannot be used to justify false positive of others. Then, he again commits a crude manipulation easily spotted by even non-experts, let alone scientists. Finally, the computer marked the elements, and no secondary bands were present for the elements. \n\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">Vogel claims to have detected dielectric birefringence in inclusions around the edges of the sample by means of optical microscopy with cross-polarized illumination.\u201d</span>\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">However, such observation can also be produced by samples that have rugged topography.\u201d</span>\n\n\nBirefringence was not just detected around the edge, but in gross areas. An expert like Vogel should have known to spot the difference. Refer Part 2 of this article for refutation and compare with Ivan's \u201cduplication\u201d. \n\n<span style=\"color:#004586;\">\u201cSince the sample analysed by Vogel has a very clear rough surface, the bright regions he observes under cross-polarized light are best explained by the surface topography and not by the presence of non-metallic crystal inclusions in the sample.\u201d</span>\n\n\n\nWhile examining the first specimen Vogel comments \u201cIt is silvery as you can see in colour. It looks like it has been melted. This is the last specimen which was mounted in plastic, lapped and '''polished''' in Switzerland and now you can see this meal in its pristine state\u201d.\n\n<span style=\"background-color:transparent;\">Again, w</span>hile examining the 5<sup>th</sup> sample belonging to stage 4, Vogel comments <span style=\"background-color:transparent;\">\u201cWe are now looking at a silvery metal fifth specimen number 5 at the 4</span><span style=\"background-color:transparent;\"><sup>th</sup></span><span style=\"background-color:transparent;\"> stage of development, that is used according to the document that was given to me in the preparation of the spacecraft. We are looking at the object now, which is being lapped and </span><span style=\"background-color:transparent;\">'''polished'''</span><span style=\"background-color:transparent;\">,</span><span style=\"background-color:transparent;\"> under cross field polarized light using a 250W Cesium Iodide light source\u201d.</span>\n\n\nThe polishing status of the other specimen is not known, but it would be safe to presume that someone of Vogel's credential would eliminate such problems before testing the sample and/or otherwise would know to differentiate between reflection from rough/scratched surface localized at the edges and real birefringence. T<span style=\"background-color:transparent;\">he samples Vogel tested had uneven shape, and undulations were present. It is best practice to polish a sample before birefringence test. But even an unevenly shaped, undulated samples can be inspected for birefringence. What matters are that the false positives from sharp edges or extensions of the sample should not interfere, and even they do, they can be isolated. To eliminate such possibility of sharp edge/rough surface/scratching type birefringence in a not so well polished sample, the sample is first visually inspected, then microscopically inspected at different magnification to record its micro and macro level behaviour (Vogel did tests birefringence at various magnifications). Refer [[#Part 2 \u2013 Second Attempt]] for explanation how edge produced effects are similar to a non-expert, but also very different from what a real birefringent sample would produce.</span>\n\n\nMoreover, the birefringence observed by Vogel was not localised to edges as seen from video. The difference between the effect due to reflection from rough surface and birefringence is explained in detail in [[#Part 2 \u2013 Second Attempt]].\n\n\n<span style=\"color:#004586;\">\u201c</span><span style=\"color:#004586;\">For example, Vogel claimed that Rhenium was found in the sample with missing EDS bands also; the spectrum was not shown in either references [1] or [2] and it could have been Zinc, as this element has some EDS bands close to that of Rhenium.\u201d</span>\n\n\nNote how in the case of Thulium, Bromine, Argon and Silver only a single peak is present in Vogel's analysis<span style=\"background-color:transparent;\">.</span> For Rhenium, the primary peaks are for its L\u03b11 emission line at 8.586 KeV, followed by M\u03b11 emission line at 1.842 KeV. There are actually several possibilities for Rhenium:\n\n\u2013 Both the L\u03b11 and M\u03b11 peaks were detected and one or more of the secondary/minor peaks also detected. In this case, it would have been hard to refute Rhenium, but most probably this did not happen, following the pattern for other elements in the metallic region.\n\n- Only L\u03b11 peak detected. \n\n- Only M\u03b11 peak detected.\n\n\nWe never knew if Rhenium was a \"major\" element or \u201cminor\u201d element in the metal area. Had It been a major element, only Zinc with similar relative intensity at 8.639 KeV could have compared with Rhenium in nearby spectral range. For M\u03b11, this role could have been taken by highly reactive Strontium.\n\n\nAs postulated before, it is also possible that Vogel did not document 100% of his findings in Video. Also, Ivan mentions \"if\" Rhenium was though to be found, it could have been mistaken in place of \"Zinc\". Again, we see Ivan relying on nothing but instrument error to debunk presence of Rhenium, when in reality it is not possible to determine instrument error from the video. \n\n\nIvan time and again produced visually similar (not same) spectrum with crude manipulations and tried to associate the results of Vogel's analysis as instrument error or gross negligence or outright complicity. He used his go-to arguments to confuse the readers and debunk Thulium, Argon and Rhenium. He similarly used crude method to nearly simulate birefringence, as well as micro-manipulation. Then again, he completely ignored several other unusual properties exhibited by the sample. On the light of this, IIG and Ivan's debunking should not be taken seriously and further analysis should only be entertained from an unbiased metallurgist.\n\n= Appendix A \u2013 Important terms and procedures =\n\n'''Birefringence''': Birefringence is formally defined as the double refraction of light in a transparent, molecularly ordered material, which is manifested by the existence of orientation-dependent differences in refractive index. Many transparent solids are optically isotropic, meaning that the index of refraction is equal in all directions throughout the crystalline lattice. Typical examples of isotropic solid are glass, table salt. \n\nAn example of anisotropic material are Calcite and quartz. The layman\u2019s explanation of birefringent behaviour of Calcite is that when object is shown through Calcite, tend to show double or blurred images. \n\n\n'''Polarized light '''or polarization of light: Natural sunlight and almost every other form of artificial illumination transmits light waves whose electric field vectors vibrate in all perpendicular planes with respect to the direction of propagation. When the electric field vectors are restricted to a single plane by filtration, then the light is said to be ''polarized'' with respect to the direction of propagation and all waves vibrate in the same plane. \n\n\n'''X-ray diffraction (XDR)''': This method is used in X-ray crystallography. This tool used for identifying the atomic and molecular structure of a crystal, in which the crystalline atoms cause a beam of incident X-rays to diffract into many specific directions. By measuring the angles and intensities of these diffracted beams, a crystallographer can produce a three-dimensional picture of the density of electrons within the crystal. From this electron density, the mean positions of the atoms in the crystal can be determined, as well as their chemical bonds, their disorder and various other information. \n\n\n\n\n'''Scanning electron microscope (SEM)''': A scanning electron microscope is a type of electron microscope that produces images of a sample by scanning it with a focused beam of electrons. For conventional imaging in the SEM, specimens must be electrically conductive, at least at the surface, and electrically grounded to prevent the accumulation of electrostatic charge at the surface. Metal objects require little special preparation for SEM except for cleaning and mounting on a specimen stub. Non conductive specimens tend to charge when scanned by the electron beam, and especially in secondary electron imaging mode, this causes scanning faults and other image artefacts. SEM can also act as an electron source for producing characteristics X-Rays for Energy Dispersive X-Ray analysis. A nice video can be found on youtube that demonstrates how SEM EDS analysts identify the elements<ref>[https://www.youtube.com/watch?v=GY9lfO-tVfE https://www.youtube.com/watch?v=GY9lfO-tVfE]</ref>. \n\n\n\n\n'''Energy-dispersive X-ray (EDX)''': Energy-dispersive X-ray spectroscopy (EDS, EDX, or XEDS), sometimes also called energy dispersive X-ray analysis (EDXA) or energy dispersive X-ray microanalysis (EDXMA), is an analytical technique used for the elemental analysis or chemical characterization of a sample. \n\n\n'''Auto-peak-detection:''' In EDS analysis the computer labels the peak automatically. Each element has its \u201cunique\u201d characteristics emission radiation when its K, L, M shell electrons gets displaced by an incident beam of electron and thereafter an electron from one shell \u201cjumps\u201d to fill the void thereby giving by x-ray radiation which are unique for the element. The energy of the emission is detected by a detector. The computer database stores the unique emission. If a match is found in database with the energy of the characteristics emission that detected by a detector, the Computer labels it on the screen itself. This is called auto-peak-detection. But in certain cases, the peak might be two weak against the background or the peak might be overlapped against a bigger peak of same or different element, then this auto-peak-detection is \u201comitted\u201d. At other times, cases of false identification can also take place, due to various reasons. This is explained in [[#Part 1 \u2013 Second Attempt]]. \n\n\n'''Bremsstrahlung''': <span style=\"color:#000000;\">It is an important phenomenon in the generation of X-rays. In the Bremsstrahlung process, a high speed electron travelling in a material is slowed or completely stopped by the forces of any atom it encounters. As a high speed electron approaches an atom, it will interact with the negative force from the electrons of the atom, and it may be slowed or completely stopped. If the electron is slowed down, it will exit the material with less energy. The law of conservation of energy tells us that this energy cannot be lost and must be absorbed by the atom or converted to another form of energy. The energy used to slow the electron is excessive to the atom and the energy will be radiated as x-radiation of equal energy. </span>\n\n\n'''Analytical Problems with SEM-EDS''':\n\nEscape peaks \u2013 there is a statistical probability that some of the X-rays, generated in the sample and impacting the solid state detector (e.g., a SiLi device), will 'inadvertently' knock out Si K-shell electrons in the detector, reducing that X-ray's energy measured in the detector by the Si absorption edge energy (1.84 KeV). Say you're looking at something will lots of Fe (Ka of 6.40 KeV); the Si-escape peak of Fe Ka will appear at 4.56 KeV. You see this escape peak only for the major elements present.\n\nSum peaks \u2013 this phenomenon occurs where the count rates are moderate to high, when two X-rays impact the detector virtually instantaneously; the pulse created and measured is the sum of the two X-ray energies. Say you have a sample with lots of Si (Ka of 1.74 KeV) and Al (Ka of 1.487); a peak at 3.23 KeV is the sum peak, not to be assumed to be a K peak (Ka of 3.31 KeV)<ref>http://www.geology.wisc.edu/~johnf/660.html</ref>.\n\nPeak overlaps \u2013 the spectral resolution of EDS is not a great as WDS. Resolution is usually defined as the FWHM (full width at half maximum) of pure Mn Ka: ~ 150 eV. Therefore, the separation of some peaks can be poor. Examples include the case where small amounts of Fe are being investigated in the presence of large amounts of Mn (Mn Kb is very close to Fe Ka), and the case where Cu, Zn and Na are present together: the L lines of Cu and Zn are close to the K lines of Na.\n\nExcessive deadtime \u2013 because of the closeness of the EDS detector to the sample, and the possibility that the user may be using high beam currents, there may be 'pulse pileup' where the electronics cannot keep up with the X-rays impacting the detector. The electronics/software therefore has to try to adjust for the x-rays not counted, by calculating a 'deadtime correction'; the larger the correction, the greater the margin of error. Generally the deadtime should be kept below 20-30% by the operator (usually indicated on the monitor), either by lowering the beam current, inserting apertures in front of the detector nose-piece, or retracting the detector (if adjustable). Excessive deadtime can also cause a shift of the peak position.\n\n\n'''Pot metal''': Pot metal is a colloquial term that refers to alloys of low-melting point metals that manufacturers use to make fast, inexpensive castings. Pot metal frequently constitute zinc, lead, copper, tin, magnesium, aluminium, iron, and cadmium.\n\n\n'''Sputter coating or metal coating''': Sputter coating in scanning electron microscopy is a sputter deposition process to cover a specimen with a thin layer of conducting material, typically a metal, such as a gold. A conductive coating is needed to prevent charging of a specimen with an electron beam in conventional SEM mode (high vacuum, high voltage). \n\n\n'''Field emission microscopy (FEM):''' It is an analytical technique used in materials science to investigate molecular surface structures and their electronic properties. Invented by Erwin Wilhelm M\u00fcller in 1936, the FEM was one of the first surface analysis instruments that approached \u201cnear-atomic\u201d resolution.\n\n\n= Appendix B \u2013 Characteristic X-Ray of elements in discussion =\n\nAppendix B lists the characteristic x-ray relative intensity for important elements detected plus Aluminium (which Ivan allege that Vogel mistook for Thulium) and Zinc and Carbon (both which Ivan shows as an example in his debunking) \n\n\nRelative intensities are provided. An intensity of 100 is assigned to the strongest line in each shell for each element. \n\n\nFactors related to the sample, the system used to generate the X-rays and the detector used to measure the X-ray spectrum can all influence the height of the X-ray peaks. While the intensities of the peaks in an X-ray energy spectrum are not directly proportional to element concentration, it is true that the concentration of the element in the sample will influence the height of the X-ray peak. Elements present in major amounts (> 10 wt%) will have major peaks in the spectrum while elements present in minor (1-10 wt%) or trace amounts (<1 wt%) will have small or undetectable peaks in the spectrum<ref>http://www.ammrf.org.au/myscope/analysis/eds/xrayintensity/</ref>. \n\n\n\n\n\n{| style=\"border-spacing:0;width:17.013cm;\"\n|-\n| style=\"border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Band (in eV)'''\n| style=\"border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Line'''\n| style=\"border-top:0.05pt solid #000000;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Relative Intensity'''\n| style=\"border:0.05pt solid #000000;padding:0.097cm;\" | '''Comment'''\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Thulium (Tm)'''\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1462\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | M\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 6341.9\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L1\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 4\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 7133.1\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 7179.9\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 8101\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b21\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 64\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (intense)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 8468\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b22\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 20\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 9426\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b31\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | <higher spectrum omitted>\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Aluminium (Al)'''\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1486.3\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 50 \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (secondary band overlapped by stronger K\u03b12)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1486.7\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (primary identifier)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Bromine (Br)'''\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1293.5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L1\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1480.4\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b11,2\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 111\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1525.9\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b21\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 59\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (intense)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 11877.6\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 52\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 11924.2\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100 \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 13284.5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b23\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 7\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 13291.4\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b21\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 14\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 13469.5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b22\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Argon (Ar)'''\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 2955.6\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 50 \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (intense, but overlapped by K\u03b11)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 2957.7\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (primary identifier)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 3190.5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b21,3\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 10\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Silver (Ag)'''\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 2633.7\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L1\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 4\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 2978.2\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 2984.3\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (srtong)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 3150.9\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b21\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 56\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (intense)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 3347.8\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b22,15\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 13\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 3519.6\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b31\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 6\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 21990.3\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 56\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (intense)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 22162.9\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100 \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 24911.5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b23\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 9\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 24942.4\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b21\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 16\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 25456.4\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b22\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 4\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Sulpher (S)'''\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 2306.6\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 50\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (intense)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 2307.8\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100 \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong, primary identifier)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 2464\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b21\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Rhenium (Re)'''\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1842.5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | M\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 7603.6\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L1\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 8586.2\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 8652.5\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 10001\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b21\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 66\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (intense)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 10275.2\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b22\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 22\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 11685.4\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b31\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 13\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | <higher spectrum omitted>\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Zinc (Zn)'''\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 884\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L1\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 7\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1011.7\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b11,2\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 111\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong, primary identifier)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 1034.7\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | L\u03b21\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 65\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (intense)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 8615.8\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b12\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 51\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (intense)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 8638.9\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 100\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (strong)\n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 9572\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b21,3\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 17\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | '''Carbon (C)'''\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | \n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | \n|-\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 277\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | K\u03b11\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:none;padding:0.097cm;\" | 147\n| style=\"border-top:none;border-bottom:0.05pt solid #000000;border-left:0.05pt solid #000000;border-right:0.05pt solid #000000;padding:0.097cm;\" | (primary identifier)\n|-\n|}\n\n \n\n\n= Appendix C \u2013 Vogel Video parts summary =\n\n\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">'''Part 1''': optical inspection; remarks on a cold flow process; inspection with polarized light, remarks on birefringence</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">Link: [https://www.youtube.com/watch?v=0cFr3zzFeYk https://www.youtube.com/watch?v=0cFr3zzFeYk]</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\"><span style=\"color:#000000;\">'''Part 2'''</span><span style=\"color:#000000;\">: optical inspection continues; distinct areas within specimen detected; manipulation suspected; not made by nature; silver 4th stage sample at 1600x shows structures within structures, interlaced areas; at 2500x; birefringence tested, unusual for metals to have birefringence; Normarsky interference microscopy used; sample has both lustre of metal and crystalline pattern.</span></div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\"><span style=\"color:#000000;\">Link: </span>[https://www.youtube.com/watch?v=W_NNFL_6evQ https://www.youtube.com/watch?v=W_NNFL_6evQ]</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\"><span style=\"color:#000000;\">'''Part 3'''</span><span style=\"color:#000000;\">: SEM analysis assisted by Wie; dark 3</span><span style=\"color:#000000;\"><sup>rd</sup></span><span style=\"color:#000000;\"> stage sample number 4, sample not touched; no gold plating done, but Electron beam did not accumulate; normally samples are covered with gold for sharp picture; examined at 63X with polarised light, crystalline section composition described; plain section mechanical manipulation detected; composition of plain section described; Thulium found, sample 6 stage 5 analysis starts.</span></div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\"><span style=\"color:#000000;\">Link: </span>[https://www.youtube.com/watch?v=XxJc80DEWhE https://www.youtube.com/watch?v=XxJc80DEWhE]</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">'''Part 4''': Sample is completely metal; discrete cluster of materials, material not fused together; comments that one has to analysed each areas for proper analysis; describes birefringence; describes how he lost it; comments that he cannot put it together \u2013 Thulium, Silicon, Silver, melting would not retain discreteness; discreteness intrigued him.</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">Link: https://www.youtube.com/watch?v=vbLMCg0Vo4E</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">'''Part 5''': Remarks on Cold fusion process; he showed it to one of his friend who told he cannot put it together; remarks he is doing it independent of IBM; comments sample not terrestrial; certifies integrity of Jim Dilletosso and Wendelle; interviewer remarks Meier to be honest and lives a simple life.</div>\n\n<div style=\"margin-left:0cm;margin-right:1cm;\">Link: [https://www.youtube.com/watch?v=CNZZNRTvm9g https://www.youtube.com/watch?v=CNZZNRTvm9g]</div>\n\n\n= References =\n\n<references />\n\n\n{| style=\"border-spacing:0;width:80%;\"\n|- style=\"background-color:#eeeeee;border:0.1pt solid #eeeeee;padding:0.097cm;\"\n| align=center| '''''* The author could not locate original article from IIG West website and hence referred to billymeierufocase.com. The author copied images and text from billymeierufocase.com for critique purpose. No copyright infringement meant. Due references have been provided.'''''\n|-\n|}\n\n- <i>Subhabrata Mukhuti</i>"
                    }
                ]
            },
            "2530": {
                "pageid": 2530,
                "ns": 0,
                "title": "Reincarnation",
                "revisions": [
                    {
                        "contentformat": "text/x-wiki",
                        "contentmodel": "wikitext",
                        "*": "[[Category:Meier Encyclopedia]]\n{{Nonfigupublication}}\n==Introduction==\nReincarnation is a central tenet of all major Indian religions, namely Buddhism, Hinduism, Jainism, and Sikhism but they differ considerably from the explanations of Billy Meier.\n\nFor example the spirit form (also known as the creation energy) of a human being will always reincarnate into the body of a human being. More specifically into the human embryo when the heart begins to beat on the 21st day after conception. A cat spirit form will reincarnate into a cat embryo. A whale spirit form into a whale embryo etc.\n\n==Questions Answered By [[Billy]]==\n===Remembering past lives===\nFrom the FIGU Forum (Questions Answered by Billy):\n\n<blockquote>This refers to the science and knowledge of reincarnation: was there any specific spiritual Science which dealt and showed humans or for that matter [[Plejaren]] the ways of remembering reincarnated past lives to develop in each new life when becoming physical again, is it a possibility?<br />\n\nThe reason for the question is because in my outside readings there has been claim of such Science but through Vatican/Christian laws or otherwise, they have either destroyed the books for the sake of taking this power away from humans.<br />\n\n'''Answer:''' Such science was never present or taught on Earth. Such claims most probably are simply based on new-age nonsense.<br />\n\nOf course, the functioning of reincarnation is a part of the spiritual teachings (and is explained within it).<br />\n\nHowever, on other planets there certainly may be teachings/science regarding remembrance of reincarnations.<ref>http://forum.figu.org/cgi-bin/us/discus.cgi?pg=next&topic=12&page=2685</ref></blockquote>\n===Pure spirit-forms===\nFrom the FIGU Forum (Questions Answered by Billy):\n\n<blockquote>As I understand it, once a person dies on a planet, he will then reincarnate on this same planet.<br />\n\nFor beings that have evolved beyond the need for physical bodies are they also obligated to stay in the region of their homeworlds, or do they have the choice to move throughout the universe?<br />\n\n'''Answer:''' Hi Scott,<br />\n\nThe beings you mentioned are pure spirit-forms (Reingeistformen). Their realm is extended throughout the Universe. (Arahat Athersata is the lowest of those realms.) They are not bound to a system or planet anymore.<ref>http://forum.figu.org/cgi-bin/us/discus.cgi?pg=next&topic=12&page=2685</ref></blockquote>\n\n===Reincarnating onto star ships===\nFrom the FIGU Forum (Questions Answered by Billy):\n\n<blockquote>If a slow moving (primitive) space ship takes several generations to reach it's destination planet, and during this journey babies are born in this ship (therefor increasing it's population), where would the spirit-forms come from?<br />\n\n'''Answer:''' Hi Jean Pierre,<br />\n\nThe spirit-forms would come from the nearest planet that is inhabited by human beings (where the people are at least as highly developed/evolved as the people in the space ship).<ref>http://forum.figu.org/cgi-bin/us/discus.cgi?pg=next&topic=12&page=2685</ref></blockquote>\n\n==Further Reading==\n<div style=\"column-count:4;-moz-column-count:4;-webkit-column-count:4\">\n<div id=\"mf-mainsections\" title=\"secondNavigation List\"><small>\n* [[Books]] - Life and Death\n* [[Death, Afterlife and Rebirth]]\n* [[Death,_Afterlife_and_Rebirth#Death|Death]]\n* [[Death,_Afterlife_and_Rebirth#Afterlife|Afterlife]]\n* [[Death,_Afterlife_and_Rebirth#Structures_of_the_Spiritual_Realm|Structures of the Spiritual Realm]]\n* [[Death,_Afterlife_and_Rebirth#What_is_the_Comprehensive_Consciousness_Block.3F|The Comprehensive Consciousness Block]]\n* [[Death,_Afterlife_and_Rebirth#Evolution_in_the_Spiritual_Realm|Evolution in the Spiritual Realm]]\n* [[Human Spiritform]]\n* [[Life in Spiritual and Physical]]\n* [[Consciousness Evolution]]\n* [[Beyond Area]]\n* [[Beyond Area|Realm of the beyond]]\n* [[Beyond Area|Other worldly area]]\n* [[File:Twenty Cases Suggestive of Reincarnation.pdf|Twenty cases suggestive of reincarnation.pdf]]\n* [[File:Twenty Cases Suggestive of Reincarnation.epub|Twenty cases suggestive of reincarnation.epub]]\n</small>\n</div>\n</div>\n{{LINKNAVS2|[[File:Pinterest_UFO_Contactee_Billy_Meier_089.jpg|frameless|Source: https://www.pinterest.com/stormin3/ufo-contactee-billy-meier/|110px]]<br><br>[[File:Pinterest_UFO_Contactee_Billy_Meier_091.jpg|frameless|Source: https://www.pinterest.com/stormin3/ufo-contactee-billy-meier/|110px]]}}\n\n==Source==\n* [http://theyfly.com/sites/default/files/reincarnation%20(3)%20corrected%20May%2013%202017.pdf Q&A Forum assemblage Reincarnation PDF]\n==References==\n<references />"
                    }
                ]
            }
        }
    }
}